How to Make An Office Chair Higher: The Best Ways to Add Height to Your Chair

How to Make An Office Chair Higher

Do you find yourself constantly struggling to reach your work documents or the keyboard on your computer?

If so, you may need to add height to your office chair. Luckily, this is a task that can be easily accomplished with a few simple tricks.

In this blog post, we will discuss about How to Make An Office Chair Higher. We will also provide tips for choosing the right chair height for your needs. Let’s get started!

Why is it Essential to Adjust the Office Chair’s Height?

When it comes to office work, there is no such thing as a one-size-fits-all solution. There are many things to consider when determining what is most effective for one person versus another.

This is especially true when it comes to the height of your office chair. If you do not adjust the height of your chair to fit your needs, you could end up with a variety of health problems.

In some cases, these issues can even become chronic and difficult to deal with overtime.

It is more comfortable to sit in an office chair at the right height. If your office chair is too low or high for you, you will likely find that it is uncomfortable to sit in for long periods of time.

This can lead to fatigue and pain in your neck, back, and shoulders. Adjusting seat angle and height is also crucial to preventing and managing back pain.

If you sit in a chair that is too low, your pelvis will be tilted forward which can cause back pain. Conversely, if your office chair is set too high, it will put unnecessary strain on your lower back.

The best way to avoid these problems is to adjust the height of your office chair so that it fits your size and the type of work you are doing.

Determine the required height

When it comes to adding height to an office chair, there are a few different methods you can use. The most important thing is to determine the correct height for your needs.

This can be done by measuring the distance from your elbow to the floor while you are sitting in a relaxed position.

Alternatively, you can measure the height of your desk (or another working surface) and subtract the height of your chair.

Generally speaking, a good rule of thumb is that you want at least 12 inches from the top of your thighs down to the floor when sitting in an ergonomic position with both feet flat on the ground.

This will give you plenty of room to adjust your chair height as needed.

If you are shorter than average, you may need to add height to your office chair in order to achieve a comfortable working position.

If you are taller than average, you may need to lower the chair height so that your knees are slightly bent at 90 degrees.

If you are unsure of the correct height for your chair, it is best to start with a smaller adjustment first and then make further adjustments as needed.

This will help ensure that you get the right fit without having too much or too little space between your knees and the floor when sitting down in an ergonomic position.

Check the type of chair you have

Not all office chairs are created equal. In fact, the height adjustment options on different chairs can vary greatly.

Before you start adding height to your chair, it is important to determine what type of chair you have. There are three main types of office chairs: task chairs, executive chairs, and visitor’s chairs.

Task chairs typically have a height adjustment lever located under the seat. Executive chairs typically have an up and down button on the side of the chair.

Visitor’s chairs usually do not have any type of height adjustment option at all since they are designed for short-term use only.

In most cases, if you try to add height to one of these types of chairs, you will end up damaging the chair or the height adjustment mechanism.

If you are not sure what type of office chair you have, it is best to contact the manufacturer or the retailer where you purchased the chair for more information.

Once you know what type of office chair you have, you can start adding height to your office chair.

How to Choose the Right Office Chair Height for Your Needs

Now that we have discussed why it is Essential to Adjust the Office Chair’s Height, it is important to talk about how to choose the right height for your needs.

There are a few things you will want to consider when making this decision. Your Height: The first thing you will need to do is measure your height. This will help you to choose the right office chair height for your needs.

Your Work Desk

You will also need to consider the height of your work desk. This is important because you want to make sure that you have plenty of room to work comfortably when seated at your desk.

The Tasks You Perform

Another thing to keep in mind is the type of tasks you will be performing when seated at your desk. If you will be doing a lot of typing, you may want to choose a chair with a lower height so that your arms are closer to the keyboard.

Conversely, if you will be doing a lot of reading, you may want to choose a chair with a higher height. By considering these factors, you can make sure that your office chair is the right height for you!

How to Make an Office Chair Higher: The Best Ways to Add Height

In this section, we will discuss some tips for how to make an office chair higher. These include using a pillow, using risers, or buying a new office chair with adjustable height.

Use the height adjustment lever

heigh adjustment lever

If you have a task chair or executive chair, it probably has a lever under the seat that allows you to adjust the height.

To use this, simply pull up on the lever while sitting in your chair and then slowly release it.

The chair will move down until it is at your desired height. To make sure that you are using the correct height, When you use this technique, you should be able to sit with your legs bent at 90 degrees and the top of your thighs parallel to the floor.

If you have a visitor’s chair that does not have any type of height adjustment mechanism, then you will need to use one of the other methods in this article.

Adjust the height of your office chair with a pillow

One easy way to add height to your office chair is by using a pillow. This method is especially useful if you are short or have trouble reaching the floor.

All you need is a small, firm pillow that can be easily tucked under your back when sitting in your office chair. Make sure the pillow is not too thick or too thin so that you are still able to maintain a comfortable sitting position.

If you do not have a small, firm pillow, you can also use a stack of books or magazines to add height to your office chair. Just be sure to adjust the height regularly as the materials may shift over time.

Replace the casters(wheels) with bigger ones

large casters

Another way to add height to your office chair is by replacing the casters with bigger ones. This can be a quick and easy fix if you have a chair with wheels that are too small for your needs.

All you need to do is remove the current casters from your office chair and replace them with larger ones. Make sure to choose casters that are the same size or larger than the ones you are replacing. If your chair does not have wheels, you can also add height by using risers.

Using Risers

If you do not want to buy a new office chair, you can also use risers to add height.

You can find these at any hardware store or online for less than $20. They are easy to install and will give you more room in your seat area so that it is easier on your back while sitting down at work all day long!

Use the threaded post method

If you have a desk with a threaded post in the center, you can also use this to adjust the height of your office chair. This is a great option if you are not able to use the lever on your chair or if you want more flexibility in terms of height adjustment.

To use this method, remove the top from your office chair and insert the threaded post into the hole at the base of your chair.

Then, turn the post either clockwise or counterclockwise to adjust the height. Make sure to tighten the post using a tool like an Allen key so that it does not move around while you are sitting in your office chair.

Use a longer gas lift cylinder

larger gas lift

If your office chair has a gas lift cylinder, you can also add height by replacing it with a longer one.

This is another great option if you want more flexibility in terms of how high or low the seat sits off of the ground when adjusted to its highest level.

It’s important that this method only works for certain chairs and not others since some require specific sized cylinders.

To use this method, you will need to locate the gas lift cylinder on your chair and remove it from its base. Once removed, make sure there is no gas left inside of the cylinder before attaching a longer one in its place (this should already be done by default).

Then just screw back in bolts/nuts to the base of the chair and reattach the gas lift cylinder.

Use pieces of wood

wood blocks

If you have a desk with no threaded post or hole in the center, you can use pieces of wood to add height to your office chair.

This is an easy and affordable way to add a few inches of height to your current setup. All you need are two pieces of wood that are about 12-16 inches long and an inch thick each.

Screw them on top of one another so that they are stacked vertically, then place your office chair legs into the middle slot between both pieces where you have cut out holes for them to fit through (this should already be done by default).

Once everything has been put together properly, sit down in your chair and adjust it according to how high or low you want it to be.

Add a platform below your chair

If you want to add even more height to your office chair, you can also use a platform below it. This is a great option if you are looking for a cheap and easy way to get the most out of your office chair.

To use this method, you will need to find a platform that is the same/low height as your desk and place it under your chair legs.

Then just sit down in your office chair and adjust the height according to how high or low you want it to be.

This works best if there are four legs on each side of the platform so that they don’t slide around while sitting down at work all day long!

You can find these platforms online or even make them yourself.

Just be sure that it is sturdy enough to hold up against more weight than normal chairs in order to avoid any accidents from happening when using this method.

The platform should also have rubber feet so that it doesn’t damage the floor while being used at home or in an office setting with carpeting.

This is a great option for people who need extra height but don’t have access to other methods like leg extensions which may be too expensive due to their prices on the market nowadays.

It’s also much easier than trying out different types of chairs until one is found that fits the person’s height just right.

Use a height extension kit

If you want to add even more height to your office chair, you can also use a height extension kit.

This is a great option if you are looking for a more permanent way to add height to your office chair and don’t mind spending a bit of money.

To use this method, you will need to purchase a height extension kit that is specific to your make and model of office chair.

Once the kit has been purchased, follow the instructions on how to install it properly. This should take no more than an hour or two depending on how much time you have available for this project!

Once everything has been installed correctly, sit down in your chair and adjust the height according to how high or low you want it to be.

There are many different heights that can be achieved with these kits, so be sure to measure the height of your current desk before making a purchase.

Get a Chair Designed for Taller People

If you want to add even more height to your office chair, you can also get a chair that is designed for taller people.

This is a great option for someone who is looking to buy an office chair that has more height in it than the average person’s setup.

You can find these chairs online or at your local furniture store and they usually come with special features like footrests, lumbar support, adjustable seat depth (for taller people), etc.

Once you have found the right chair for your needs, sit down in it and adjust it according to how high or low you want it to be.

This is a great option if you are looking for something that is more permanent than using a platform or height extension kit.

Just like with the other methods mentioned earlier, make sure that the chair is sturdy enough to hold up against more weight than normal chairs in order to avoid any accidents from happening when using this method.

Recommended Products

Use Aluminum Foil

If you are looking to add height to your office chair, but don’t have a lot of money or time available for this project then try using aluminum foil.

This is a great option as it will cost next nothing and take just minutes! All you need is some kitchen foil that can be bought at most stores these days (even dollar stores) and a pair of scissors.

Once you have the materials, follow these steps:

  • Remove the base from your chair’s cylinder using a rubber mallet.
  • Make a cylinder out of aluminum foil and insert it into the hole where the cylinder joins with the base.
  • Ensure that the aluminum foil is properly aligned in the hole to minimize its diameter.
  • All of the above is finished, and you may now put your gas cylinder back.
  • The foil prevents the cylinder from sliding down.

This trick only restores the height of your office chair to its original setting and does not extend it higher than the manufacturer intended.

Please be aware that this is a temporary fix and should not be used for an extended amount of time as it may damage the office chair or floor. Additionally, make

sure that the aluminum foil is tightly fitted into the hole to avoid any accidents from happening when using this method.

Stand Instead of Sitting

If you are not able to add height to your office chair, another option is standing.

This might seem like an obvious solution but it can be hard for some people who have back problems or other medical conditions that make sitting uncomfortable.

There are a few different ways that one could go about this method.

Get a stand-up desk, this is a great option for people who want to switch between sitting and standing throughout the day.

These desks usually have adjustable heights and can be bought at most office supply stores or through online.

If you are unable to purchase a stand-up desk, you could try using a countertop or bar as your workspace, this is a great solution for people who work from home or are on the go.

All you need is a sturdy surface that is at least the height of an office chair.

If neither of these solutions are possible, you could try using a stool or box to stand on while working, just make sure that it is stable and will not cause any accidents.

Once you have found the right method for standing at your desk, try it out and see if it helps with any back pain or discomfort you might be experiencing from sitting all day.

Use Papers to Add Height to Your Chair

As far as outlandish solutions go, using papers to add height to your chair is one of the easiest and cheapest options.

This method does not require any tools or hardware and can be done in minutes!

All you need is a few sheets of paper towel (or any thin paper), some scissors, and a rubber mallet.

Here are the steps:

  • Remove your chair’s cylinder using a rubber mallet.
  • Take some paper towels and cut them into thin strips.
  • Make sure that they are narrower than the diameter of your spring section.
  • Pack the paper towel strips tightly into the column using a screwdriver or other cylindrical object.
  • Reattach the spring section and you should notice a height difference.

This method is not permanent and should only be used as a temporary fix.

Additionally, make sure that the paper towel strips are tightly packed into the column to avoid any accidents from happening when using this method.

FAQs

To make your office chair shorter, you can remove the spring section and replace it with a small cylinder. You should also add some paper towels to the column so that they are tightly packed inside of it. This will help keep everything in place while making adjustments easier later on down the road if necessary!

If you have an office chair that won’t stay up, first try tightening the adjustment knob. If this does not work, then it is likely due to a damaged piston or cylinder and will need to be replaced by your local furniture store.

Your chair should be at a height where your feet are flat on the floor and your knees bend at an angle of 90 degrees. The seat should also allow for two inches between it and the back of your knee when sitting down with both legs extended forward. If you cannot find one that fits these criteria, try adjusting the height of other furniture such as desks or tables until they are comfortable for you.

Conclusion

No matter what height you are, it is important to find a comfortable way to work throughout the day.

By using one of the methods mentioned in this how to make an Office chair higher article, you can easily adjust your office chair to be the perfect height for you!

Just make sure that whatever method you choose is safe and will not cause any accidents. Happy working!

Rate this post
How to Make An Office Chair Higher: The Best Ways to Add Height to Your Chair
Scroll to top